size chart
Our bedding is sewn, and garment dyed by hand. We do this at our workshop in Burnaby.
This means there may be small variations from item to item, measurements listed below are approximate.
duvet cover
| SIZE | WIDTH | LENGTH |
| single | 168 cm (68") | 224cm (88") |
| double | 196cm (77") | 224cm (88") |
| queen | 218cm (86") | 224cm (88") |
| king | 259cm (102") | 224cm (88") |
all duvets are made with zipper closure
fitted sheet
| SIZE | WIDTH | LENGTH | DEPTH |
| single | 99cm (39") | 191cm (75") | up to 25cm (10") |
| single extra long | 99cm (39") | 203cm (80") | up to 25cm (10") |
| double | 137cm (54") | 191cm (75") | up to 25cm (10") |
| double extra deep | 137cm (54") | 191cm (75") | 28-38cm (11"-15") |
| queen | 152cm (60") | 203cm (80") | up to 28cm (11") |
| queen extra deep | 152cm (60") | 203cm (80") | 28-38cm (11"-15") |
| queen extra extra deep | 152cm (60") | 203cm (80") | 38-46cm (15"-18") |
| king | 198cm (78") | 203cm (80") | up to 28cm (11") |
| king extra deep | 198cm (78") | 203cm (80") | 28-38cm (11"-15") |
| king extra extra deep | 198cm (78") | 203cm (80") | 38-46cm (15"-18") |
| california king | 183cm (72") | 213cm (84") | up to 28cm (11") |
flat sheet
| SIZE | WIDTH | LENGTH |
| single | 142cm (56") | 259cm (102") |
| queen | 233cm (92") | 259cm (102") |
| king | 254cm (100") | 259cm (102") |
pillowcase
| SIZE | WIDTH | LENGTH |
| queen | 51cm (20") | 84cm (33") |
| king | 51cm (20") | 104cm (41") |
| 18x18" | 46cm (18") | 46cm (18") |
| 25x25" | 64cm (25") | 64cm (25") |
construction
single duvet cover
a single duvet cover is made of 6 panels, 3 for each side:
– centre ~140cm (55″) wide
– side panels ~13cm (5″)
single fitted sheet
Single beds are 39 inches (99cm) across so we have to add a small panel along each side of the sheet. This falls entirely below the level of the top of the mattress with the seam running along the bed. This is mirrored on the other side of the bed.
single flat sheet
Single flat sheets are 56 inches (142cm) across so there are no seams in our single flat sheets.
PRO-TIP: When you make the bed, put the flat sheet on “upside down” with finished side facing down and the back side of the sheet facing up with your duvet cover on top. Then you’ll be sleeping between the two finished sides of the sheets.
double duvet cover
Double duvet covers have seams around the entire edge as well as 2 seams running top to bottom on each side. The centre panel is about 140cm (55″) wide. The side panels are about 25cm (10″).
double fitted sheet
Double beds are 54 inches (137cm) across so we have to add a small panel along each side of the sheet. These fall along the side of the mattress with the seams right along the edge of the bed. This is mirrored on the other side.
double flat sheet
Because double beds are only 6 inches (15cm) narrower than queen beds, we do not make a double flat sheet. A queen flat sheet is about 92 inches (234cm) across and easily covers a double bed. The seams run right along the edge on each side.
PRO-TIP: When you make the bed, put the flat sheet on “upside down” with finished side facing down and the back side of the sheet facing up with your duvet cover on top. Then you’ll be sleeping between the two finished sides of the sheets.
queen duvet cover
Queen duvet covers have seams around the entire edge as well as 2 seams running top to bottom on each side. The centre panel is about 140cm (55″) wide. The side panels are about 38cm (15″).
queen fitted sheet
Queen beds are 60 inches (152cm) across, we have to add a panel along the right and left side of the mattress. The seams run along the top, very close to to each edge. There’s also a dart in each corner for a drop corner style allowing the sheet to fit a range of depths and easing the tension to help it last longer.
queen flat sheet
A queen flat sheet is about 92 inches (234cm) across and is made with a centre panel of about 56 inches (142cm) and two side panels of 18 inches (46cm) each. The seams fall along the side very close to the edge of the mattress, mirrored on the other side.
PRO-TIP: When you make the bed, put the flat sheet on “upside down” with finished side facing down and the back side of the sheet facing up with your duvet cover on top. Then you’ll be sleeping between the two finished sides of the sheets.
king duvet cover
King duvet covers have seams around the entire edge as well as 2 seams running top to bottom on each side. The centre panel is about 190cm (75″) wide. The side panels are about 30cm (12″).
king fitted sheet
King beds are about 80 inches (203cm) across. We usually use a slightly wider muslin for king sheets that allows us to move the seams to the edges, similarly to our queen and double sheets. We still add a panel along each side with the seams running along the right and left edge of the bed.
king flat sheet
A king flat sheet is about 100 inches (280cm) across and is made with a centre panel of about 66 inches (193cm) and two side panels of 17 inches (43cm) panels each. The seams fall along the right and left side running very close to the edge of the mattress.
PRO-TIP: When you make the bed, put the flat sheet on “upside down” with finished side facing down and the back side of the sheet facing up with your duvet cover on top. Then you’ll be sleeping between the two finished sides of the sheets.